View EALP03SXCOA0-AM_9049397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2010, everlight americas inc. all rights reserved. release date : may.25, 201 3 issue no:1 www.everlight americas .com p - led ealp03sxcoa0 - am lead (pb) free poduct - rohs compliant feature ? low profile. ? uniform color ? high flux output ? colorless clear resin. ? brightness: 565 0 to 1125 0 m lm at 70 ma . ? qualification according to aec - q101. ? packaged in tubes for use wi t h automatic insertion equipment . ? compliance with eu reach . ? compliance halogen free .(br <900 ppm ,cl <900 ppm , br+cl < 1500 ppm). applications ? automotive exterior lighting : turn light, tail light , rear - view mirror light, side light, license light switch , 3 rd braking light etc. ? substitution of traditional light. ? electronic signs and signals. ? general applications. ? device selection guide chip emitted color resin color material algainp reddish orange water clear
datasheet p - led ealp03sxcoa0 - am 2 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com table of content page product nomen clature 3 absolute maximum ratings (ta=25 ) 3 electro - optical characteristics (ta=25 ) 4 bin range of dominant wavelength (ta=25 ) 5 bin range of forward voltage (ta=25 ) 6 bin range of total flux (ta=25 ) 7 typical electro - optical characteristics curves 8 package dimension s 10 label expl anation 1 1 antistatic packing materials tube and standard boxes 1 2 precautions 1 3 revision history 1 5
datasheet p - led ealp03sxcoa0 - am 3 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 12 v continuous forward current i f 70 ma peak forward current (duty 1/10 @1khz) i fp 150 ma power dissipation pd 200 mw led junction temperature t j 125 operating temperature t opr - 40 ~ + 100 storage temperature t stg - 40 ~ +1 1 0 thermal resistance rth j - a 150 k/w electrostatic disc harge esd hbm esd mm 2000 200 v soldering temperature(t=5 sec) t sol 260 5
datasheet p - led ealp03sxcoa0 - am 4 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition total flux v 5650 --- 11250 mlm i f = 70 ma peak wavelength p ----- 624 ----- nm i f = 70 ma dominant wavelength d 610 --- 620 nm i f = 70 ma spectrum radiation bandwidth ? ----- 18 ----- nm i f = 70 ma viewing angle 2 1/2 ----- 40 ----- deg i f = 70 ma forward voltage v f 1.9 ----- 2.9 v i f = 70 ma reverse current i r ----- ----- 10 a v r =5v note: 1. tolerance of total flux : 11% 2. tolerance of dominant wavelength: 1nm 3. tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxcoa0 - am 5 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com bin range of forward voltage bin min. max. unit condition 1 1.9 2.1 v i f = 70 ma 2 2.1 2.3 3 2.3 2.5 4 2.5 2.7 5 2.7 2.9 note: tolerance of forward voltage: 0.1v
datasheet p - led ealp03sxcoa0 - am 6 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com bin range of dominant wavelength note: tolerance of dominant wavelength: 1nm bin min. max. unit condition 6 610 613 . 5 nm i f = 70 ma 7 613 . 5 617 8 6 17 620
datasheet p - led ealp03sxcoa0 - am 7 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com bin range of total flux bin min. max. unit condition s2 5650 7150 mlm i f = 70 ma t1 7150 900 0 t2 9000 11250 note: tolerance of total flux : 11%
datasheet p - led ealp03sxcoa0 - am 8 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com typical electro - optical characteristics curves typical c urve of s pectral d istribution diagram characteristics of r adiation -80 -60 -40 -20 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 30 60 90 relative intensity (a.u.) viewing angle (degree) 560 580 600 620 640 660 wavelength (nm) 0.00 0.50 1.00 r e l a t i v e i n t e n s i t y
datasheet p - led ealp03sxcoa0 - am 9 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com forward current vs. forward voltage (ta=25 ) dominant wavelength vs. forward current (ta=25 ) forward current (ma) dominant wavelength (nm) forward voltage (v) forward current (ma) relative luminous intensity vs. forward current (ta=25 ) max. permissible forward current vs. ambient temperature relative luminous intensity (a.u.) forward current (ma) forward current (ma) ambient temperature ( ) 0.0 0.2 0.4 0.6 0.8 1.0 0 10 20 30 40 50 60 70 forward current relative intensity 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.0 100.0 0.0 20.0 40.0 60.0 80.0 100.0 617 618 619 620 621 0 10 20 30 40 50 60 70 forward current dominant wavelength 0 10 20 30 40 50 60 70 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 forward voltage forward current
datasheet p - led ealp03sxcoa0 - am 10 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com package dimension note : tolerances unless mentioned 0. 25 mm. unit = mm
datasheet p - led ealp03sxcoa0 - am 11 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com antistic packing materials tube tube label expla nation ? qty: packing quantity ? lot no: lot number ? cat: rank of (vf)(note*)(v) note: d /cie/color temperature note: tolerances unless mentioned 2.0mm. unit = mm standard box o uter label explanation ? cpn: customers product number ? p/n: product numb er ? qty: packing quantity ? cat: rank of (vf)(note*)(v) ? note: d /cie/color temperature ? hue/ref: reference ? lot no: lot number note: tolerances unless mentioned 3.0mm. unit = mm label area
datasheet p - led ealp03sxcoa0 - am 12 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com packing quantity packing material length width height (mm) tube qua ntity (pcs) led quantity (pcs) tube 485 x 9.5 x 12 1 60 standard box 510 x 100 x 45 30 1800 large box 510 x 150 x 90 105 6300 note: 1. normal packing specification is use standard box, unless already defined initially. 2. vacuum packing with anti - sta tic bag after packing in standard box. 3 . specifications are subject to change without prior notice. notes 1. lead forming ? during lead formation , the leads should be bent at a point at least 3mm from the base of the epoxy bulb. ? lead forming should be done be fore soldering. ? avoid stressing the led package during leads forming . the stress to the base may damage the leds characteristics or it may break the leds. ? cut the led leadframes at room temperature. cutting the leadframes at high temperatures may cause fa ilure of the leds. ? when mounting the leds onto a pcb , the pcb holes must be aligned exactly with the lead position of the led. if the leds are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the leds. 2. stor age ? the leds should be stored at 30c or less and 70%rh or less after being shipped from everlight americas and the storage life limits are 3 months. if the leds are stored for 3 months or more, they can be stored for a year in a sealed container with a ni trogen atmosphere and moisture absorbent material. ? please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. soldering ? careful attention should be paid during soldering. solder the led no lower than 1.6mm from the base of stopper is recommended. ? avoiding applying any stress to the lead frame while the leds are at high temperature particularly when soldering.
datasheet p - led ealp03sxcoa0 - am 13 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com ? recommended soldering conditions: hand soldering dip soldering temp. at tip of ir on 3 00 max. (30w max.) preheat temp. 100 max. (60 sec max.) soldering time 3 sec max. bath temp. 26 0 max. distance n o lower than 1.6mm from the base of stop per bath time. 5 sec max. distance n o lower than 1.6mm from the base of stop per ? dip and hand solde ring should not be done more than one time . ? after soldering the leds, the epoxy bulb should be protected from mechanical shock or vibration until the leds return to room temperature. ? a rapid - rate process is not recommended for cooling the leds down from th e peak temperature. ? although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the leds. ? wave soldering parameter must be set and maintain according to recommende d temperature and dwell time in the solder wave. 4. cleaning ? when necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute . dry at room temperature before use. ? do not clean the leds by the ult rasonic. when it is absolutely necessary, the influence of ultrasonic cleaning on the leds depends on factors such as ultrasonic power and the assembled condition. ultrasonic cleaning shall be pre - qualified to ensure this will not cause damage to the led 5. h eat management ? heat management of leds must be taken into consideration during the design stage of led application. the current should be de - rated appropriately by referring to the de - rating curve found in each product specification. ? the temperature surrou nding the led in the application should be controlled. please refer to the data sheet de - rating curve. 6. esd (electrostatic discharge) ? electrostatic discharge (esd) or surge current (eos) can damage leds. ? an esd wrist strap, esd shoe strap or antistatic glov es must be worn whenever handling leds. ? all devices, equipment and machinery must be properly grounded. ? use ion blower to neutralize the static charge which might have built up on surface of the leds plastic le ns as a result of friction between leds during storage and handing .
datasheet p - led ealp03sxcoa0 - am 14 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com 7. other ? above specification may be changed without notice. everlight americas will reserve authority on material change for above specification. ? when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sh eets . ? these specification sheets include materials protect ed under copyright of everlight americas corporation. please dont reproduce or cause anyone to reproduce them without everlight americas s consent.
datasheet p - led ealp03sxcoa0 - am 15 copyright ? 2010, everlight americas inc. all rights reserved. release date : may . 25, 201 3 i ssue no:1 www.everlight americas .com revision history rev. modified date file modified contents 2 2013/5/24 change the form of datasheet

▲Up To Search▲

Price & Availability of EALP03SXCOA0-AM

	To Download EALP03SXCOA0-AM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .